|
Previous Page
- Chlorinated Rubber
TK-26 is a special formula of chlorinated rubber and epoxy that cures, hardens and seals new concrete. It eliminates the need for other curing processes, sealing and hardening agents, when applied to new concrete as a cure, sealing in and retaining 95-98% of the moisture content for the critical 7 day curing period. Even low-humidity, high-temperature conditions will not affect its performance, provided it is applied at the proper time. This high moisture retention assures stronger fully cured concrete. To be used on interior and exterior applications, exterior applications will discolor from exposure to UV light. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 350-650 Sq. Ft./Gal.
TK-26UV meets and exceeds these Specifications:
-ASTM C-1315-95, Type 1, Class B & C
-TT-C-800A, Type II, Class 1
-ASTM-C-309, Type 1, Class A & B; Type 1-D with fugitive dye added.
-AASHTO Des. M-148, Type 1
-USA CE CRD-C-300, Type 1
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
TK-26UV is a special formula of chlorinated rubber and epoxy with UV inhibitors for non-yellowing outdoors that cures, hardens and seals new concrete. It eliminates the need for other curing processes, sealing and hardening agents, when applied to new concrete as a cure, sealing in and retaining 95-98% of the moisture content for the critical 7 day curing period. Even low-humidity, high-temperature conditions will not affect its performance, provided it is applied at the proper time. This high moisture retention assures stronger fully cured concrete. To be used on exterior or interior applications. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 350-650 Sq. Ft./Gal.
TK-26UV meets and exceeds these Specifications:
-ASTM C-1315-95, Type 1, Class B & C
-TT-C-800A, Type II, Class 1
-ASTM-C-309, Type 1, Class A & B; Type 1-D with fugitive dye added.
-AASHTO Des. M-148, Type 1
-USA CE CRD-C-300, Type 1
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
TK-26W a white pigmented chlorinated rubber and epoxy compound for curing and sealing outdoor concrete. TK-26W has all the quality properties mentioned in TK-26UV with a white pigment added. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 300-500 Sq. Ft./Gal
-ASTM C-1315-95, Type 2, Class A, B, C
-ASTM-C-309, Type 2, Class A & B
-AASHTO Des. M-148, Type 2
-USA CE CRD-C-300, Type 2
-TT-C-800A, Type II, Class 2
Data Sheet MSDS Sheet
TK-CCS - concrete colored chlorinated rubber and epoxy that cures & seals concrete that has been patched or different colored cements used, to make the concrete uniform in color and sealed from de-icing chemicals. Designed for exterior concrete. The surface of the concrete needs to be opened up for good bite and penetration. Read label or Spec Data sheet before using.
Coverage Rate depends upon the porosity of the concrete, 100 - 300 sq. ft./gal.
Data Sheet MSDS Sheet
TK-CCS Colors Concrete Sealed with TK-CCS
TK-COLOR CHART - for all products that come in color.
TK-DOT STAIN - a high solids chlorinated rubber concrete sealer and protector, designed for the Department of Transportation. To offer the protection from deicing chemicals of our Tri-Kote 26 along with the color uniformity of our TK-CCS. To be used on vertical surfaces. Read label or Spec Data sheet before using.
Data Sheet MSDS Sheet
Next Page
|
|
