ISO 9001:2000 Certified

Home Page

Overview

Directory of Related Web Sites

Products Index

-Curing & Sealing Compounds

-OTC Compliant Curing and Sealing Compounds

-Solvents and Cleaners

-Concrete Surface Retarders

-Form Release Agents

-Concrete Bonding Agents

-Chemical Concrete Hardeners

-Epoxy & Urethane Coatings

-Epoxy Joint, Crack, Bonding Agents, & Patches

-Water Repellents

-Decorative Coatings

- Products for Decorative Concrete

-Anti-graffiti Coatings

-Cementitious materials/patches

-TK-Waterproofing Systems

-Air/Vapor Barrier

-Burnish Block Sealers

Products for  Decorative Concrete


LIQUID DYE FOR CONCRETE

TK-2183 ACETONE DYE 
A solvent based, translucent dye that is formulated to color and add aesthetic value to any interior cementitious surface.  Acetone Dye comes pre-mixed and ready to use.  It is available in 16 standard colors, or colors may be combined to create an unlimited range of color combinations.
Data Sheet                     MSDS Sheet           Acetone Dye Color Chart


LIQUID STAMP RELEASE

TK-2090 LIQUID STAMP RELEASE 
A solution to be sprayed on the concrete before stamping, and it will also help keep stamping and hand tools free from concrete build up during use. It is scented with vanilla.
Data Sheet                     MSDS Sheet


CLEAR SEALERS DESIGNED FOR COLORED, STAMPED, STENCILED, ACID STAINED, ACETONE DYED CONCRETE AND EXPOSED AGGREGATE CONCRETE

BRIGHT KURE & SEAL
A blend of 100% methyl methacrylate polymers used as a superior, exposed aggregate cure, and final sealer and protective coating. Bright Seal is an excellent sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, burnish block, or any cementitious material where yellowing or discoloration cannot be allowed.  The coating is clear and does not yellow, nor degrade, with age or exposure to ultraviolet rays. 
BRIGHT KURE & SEAL CCS  a concrete colored pigment is added to cover blemishes.  Read label or Spec Data sheet before using.
Coverage Rate: 100-400 sq. ft./gal depending on the porosity of the substrate.
Data Sheet                     MSDS Sheet                Moisture Retention


BRIGHT KURE & SEAL MATTE FINISH
Bright Kure & Seal with a matting agent to remove the gloss, but retain its ability to highlight the color in the decorative concrete.
Pictures in
Sealed Decorative Concrete comparing Bright Kure & Seal to Bright Kure & Seal Matte Finish.  Read label or Spec Data sheet before using.
Coverage Rate: 100-400 sq. ft./gal depending on the porosity of the substrate.
Data Sheet                     MSDS Sheet
Sealed Decorative Concrete Pictures   



BRIGHT GLAZE 
A higher viscosity (thicker) version of BRIGHT KURE & SEAL.  It is to be used when you are looking for a one coat film, glossier than what  BRIGHT KURE & SEAL can offer.  BRIGHT GLAZE is a blend of 100% methyl methacrylate polymers used as a specialized, superior curing and sealing compound for exposed aggregate, colored stamped concrete and stenciled concrete.
Coverage Rate:  - Curing and Sealing 300-500 Sq. Ft./Gal.
   - Second Coat and Burnished Block 300-500 sq. ft./gal. Depending on        the porosity of the concrete.
Applicable Standards:
-ASTM C-1315, Type 1, Class B, C
-ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
-Federal spec. TT-C-0800
-AASHTO Des. M-148, Type 1, Clear.
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet                     MSDS Sheet


BRIGHT SEAL WB 
A 100% water-based sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, burnish block, or any cementitious material.  Bright Seal WB is to be used where solvent odors are not tolerable.  Bright Seal WB is the only water-based sealer that can bring out the wet look in the surface to be sealed.
Data Sheet                     MSDS Sheet


TK-TINT PASTE 
A color additive specially designed to be added to TK-Bright Kure & Seal or TK-AS-1 1315 only.  It is designed (when mixed properly) to make an opaque tinted cure and seal.  TK-Bright Kure & Seal or TK-AS-1 1315, mixed with TK-TINT PASTE, will then help to hide variations of shading in concrete due to placement, concrete admixes, finishing, weather conditions, etc.  When mixed, it will become part of that product and acquire the physical property of that product.
Data Sheet                     MSDS Sheet


DECORATIVE CLEANER AND REJUVINATOR

TK-12 CURE AND SEAL WASH TREATMENT
A cleaner and rejuvinator for curing and sealing compounds on existing decorative concrete
.
Application of TK-12 CURE AND SEAL WASH TREATMENT brings back the life and aesthetics of the surface by giving it a freshly applied look. While all decorative concrete eventually requires stripping and resealing, TK-12 CURE & SEAL WASH TREATMENT works to refresh and brighten sealing compounds, giving them a longer life with less need for maintenance.
Data Sheet                     MSDS Sheet

TK-COLOR CHART - for all products that come in color.