 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Epoxy and Polyurea Bonding, Patch, Crack Filling ,Joint
|
|
|
|
|
|
|
|
|
|
|
|
|
TK-2109 EPOXY BRIDGE DECK OVERLAY is a two component , solvent free, 100% solids, low modulus epoxy. It is an epoxy system specially designed to provide a flexible, yet strong bond and seal to an existing or now bridge deck or parking structure. TK-2109 EPOXY BRIDGE DECK OVERLAY, with our specified selected sharp black granite aggregate, will provide a 3/8 inch layer of exceptional skid resistance.
Data Sheet
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TK-2110 BRIDGE DECK & CRACK SEALER is a low viscosity, VOC compliant, solvent-free epoxy crack and deck sealer that was designed specifically for Department of Transportation bridge decks and parking structures. TK-2110 BRIDGE DECK & CRACK SEALER is a two-component, easy to mix, gravity type crack filler for use on now or existing horizontal concrete surfaces. It may be used as an alternative to hazardous methylmethacrylates.
Data Sheet Part A MSDS Sheet Part B MSDS Sheet
TK-9000 100% EPOXY CRACK FILLER is a two-component, 100% solids, fast setting, epoxy designed with state of the art epoxy resins with low toxicity. It is designed to flow and seep easily into small cracks in concrete decking, floors, parking and bridge decks, filling and bonding the concrete back together. TK-9000C is like TK-9000 with a concrete color pigment added.
Data Sheet Part A MSDS Sheet Part B MSDS Sheet
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
They also can be purchased in 55's and 5's for bulk pumps with a static mixer.
TK-9010 100% EPOXY CRACK AND JOINT REPAIR is a 100% solids fast setting epoxy in a 600 ML two component kit or bulk. It has a fast cure to allow for quick reopening of area. It has excellent adhesion, is very tough, and flexible to minimize the possibility of parallel cracks forming. It can be applied to damp concrete and also at low temperatures below freezing.
Data Sheet MSDS Sheet
TK-9020 JOINT FILLER is a polyurethane/polyurea hybrid that comes in a 600 ML two component kit or bulk. It has a fast cure to allow for quick reopening of area. It has excellent adhesion, is very tough, and flexible to minimize the possibility of parallel cracks forming.
Data Sheet MSDS Sheet
TK-9030 CRACK AND JOINT REPAIR is a low viscosity translucent gray polyurethane/polyurea hybrid that comes in a 600 ML two component kit or bulk. It has a fast cure to allow for quick reopening of area. It has excellent adhesion, is very tough. Its low viscosity allows it to penetrate deep into smaller 1/32" hairline cracks.
Data Sheet MSDS Sheet Test Report
TK-211 EPOXY PATCH is a 100% solids poly/amine solvent free epoxy resin system. The Epoxy can be used for bonding fresh concrete to existing concrete. Insensitive to moisture it can be used on dry or damp substrates. As much as five parts sand or aggregate can be blended to make a economical patching material up to 1 inch lifts, interior or exterior.
Data Sheet Part A MSDS Sheet Part B MSDS Sheet
TK-311 EPOXY - is a 100% solids poly/amine solvent free epoxy resin used for bonding fresh concrete to existing concrete.
Data Sheet Part A MSDS Sheet Part B MSDS Sheet
TK-411 EPOXY PASTE is a 100% solids poly/amine solvent free epoxy resin paste system for vertical and overhead patching or bonding applications. The Epoxy can be used for bonding fresh concrete to existing concrete. As much as three parts sand or aggregate can be blended to make a economical patching material up to 1 inch lifts, interior or exterior.
Data Sheet Part A MSDS Sheet Part B MSDS Sheet
|
|
|
|
|
|
|